• <li id="iwaey"></li><li id="iwaey"><tt id="iwaey"></tt></li>
  • <td id="iwaey"><tt id="iwaey"></tt></td><li id="iwaey"><menu id="iwaey"></menu></li> <li id="iwaey"><menu id="iwaey"></menu></li><button id="iwaey"></button>
  • <button id="iwaey"></button>
  • <li id="iwaey"><menu id="iwaey"></menu></li>
  • <li id="iwaey"><menu id="iwaey"></menu></li>
  • <button id="iwaey"></button>
    <li id="iwaey"></li>
  • 中文版  |   English  |   加入收藏  |   客服熱線:400-0532-596
    海博微信公眾號
    海博天貓旗艦店
    微生物技術資料
    文章檢索
      首頁 > 微生物知識->美國藥典USP28微生物檢測->抗生素的微生物檢測

    抗生素的微生物檢測



    錄入時間:2008/9/25 11:38:21 來源:青島海博

       
         ANTIBIOTICS—MICROBIAL ASSAYS (抗生素的微生物檢測)
                        MEDIA AND DILUENTS(培養基和稀釋劑)
                                    Media
       The media required for the preparation of test organism inocula are made 
    from the ingredients listed herein. Minor modifications of the individual 
    ingredients, or reconstituted dehydrated media, may be substituted, provided 
    the resulting media possess equal or better growth-promoting properties and 
    give a similar standard curve response.
       Dissolve the ingredients in water to make 1 L, and adjust the solutions 
    with either 1 N sodium hydroxide or 1 N hydrochloric acid as required, so that 
    after steam sterilization the pH is as specified.
                            MEDIUM 1

    Peptone                   6.0 g
    Pancreatic Digest of Casein 4.0 g
    Yeast Extract          3.0 g
    Beef Extract          1.5 g
    Dextrose                   1.0 g
    Agar                   15.0 g
    Water                   1000 mL
      pH after sterilization: 6.6 ± 0.1.
                             MEDIUM 2

    Peptone          6.0 g
    Yeast Extract 3.0 g
    Beef Extract 1.5 g
    Agar          15.0 g
    Water          1000 mL
    pH after sterilization: 6.6 ± 0.1.
                              MEDIUM 3

    Peptone                   5.0 g
    Yeast Extract          1.5 g
    Beef Extract          1.5 g
    Sodium Chloride          3.5 g
    Dextrose                   1.0 g
    Dibasic Potassium Phosphate 3.68 g
    Monobasic Potassium Phosphate 1.32 g
    Water                   1000 mL
    pH after sterilization: 7.0 ± 0.05.
                           MEDIUM 4
       Same as Medium 2, except for the additional ingredient 1.0 g of Dextrose.
                           MEDIUM 5
       Same as Medium 2, except that the final pH after sterilization is 7.9 ± 0.1.
                           MEDIUM 8
       Same as Medium 2, except that the final pH after sterilization is 5.9 ± 0.1.
                           MEDIUM 9

    Pancreatic Digest of Casein 17.0 g
    Papaic Digest of Soybean 3.0 g
    Sodium Chloride          5.0 g
    Dibasic Potassium Phosphate 2.5 g
    Dextrose                   2.5 g
    Agar                   20.0 g
    Water                   1000 mL
       pH after sterilization: 7.2 ± 0.1.
                            MEDIUM 10
       Same as Medium 9, except to use 12.0 g of Agar instead of 20.0 g, and to add 10 mL of Polysorbate 80 after boiling the medium to dissolve the agar.
       pH after sterilization: 7.2 ± 0.1.
                             MEDIUM 11
       Same as Medium 1, except that the final pH after sterilization is 8.3 ± 0.1.
                             MEDIUM 13

    Dextrose 20.0 g
    Peptone 10.0 g
    Water 1000 mL
       pH after sterilization: 5.6 ± 0.1.
     
                              MEDIUM 19

    Peptone          9.4 g
    Yeast Extract 4.7 g
    Beef Extract 2.4 g
    Sodium Chloride 10.0 g
    Dextrose          10.0 g
    Agar          23.5 g
    Water          1000 mL
       pH after sterilization: 6.1 ± 0.1.
                              MEDIUM 32
       Same as Medium 1, except for the additional ingredient 0.3 g of Manganese Sulfate.
                            MEDIUM 34

    Glycerol          10.0 g
    Peptone          10.0 g
    Beef Extract 10.0 g
    Sodium Chloride 3.0 g
    Water          1000 mL
        pH after sterilization:    7.0 ± 0.1.
                             MEDIUM 35
      Same as Medium 34, except for the additional ingredient 17.0 g of Agar.
                            MEDIUM 36

    Pancreatic Digest of Casein 15.0 g
    Papaic Digest of Soybean 5.0 g
    Sodium Chloride          5.0 g
    Agar                   15.0 g
    Water                   1000 mL
    pH after sterilization:              7.3 ± 0.1.
                              MEDIUM 39
       Same as Medium 3, except that the final pH after sterilization is 7.9 ± 0.1.
                              MEDIUM 40

    Yeast Extract                   20.0 g
    Polypeptone                   5.0 g
    Dextrose                            10.0 g
    Monobasic Potassium Phosphate 2.0 g
    Polysorbate 80                   0.1 g
    Agar                            10.0 g
    Water                            1000 mL
       pH after sterilization: 6.7 ± 0.2.
                              MEDIUM 41

    Pancreatic Digest of Casein 9.0 g
    Dextrose                   20.0 g
    Yeast Extract          5.0 g
    Sodium Citrate          10.0 g
    Monobasic Potassium Phosphate 1.0 g
    Dibasic Potassium Phosphate 1.0 g
    Water                   1000 mL
       pH after sterilization: 6.8 ± 0.1.
          Phosphate Buffers and Other Solutions (磷酸鹽緩沖液和其他的解決辦法)
      Prepare as follows, or by other suitable means, the potassium phosphate 
    buffers required for the antibiotic under assay. The buffers are sterilized 
    after preparation, and the pH specified in each case is the pH after 
    sterilization.

       BUFFER NO. 1, 1 PERCENT, pH 6.0— Dissolve 2.0 g of dibasic potassium 
    phosphate and 8.0 g of monobasic potassium phosphate in 1000 mL of water. 
    Adjust with 18 N phosphoric acid or 10 N potassium hydroxide to 6.0 ± 0.05.
    BUFFER NO. 3, 0.1 M, pH 8.0— Dissolve 16.73 g of dibasic potassium 
    phosphate and 0.523 g of monobasic potassium phosphate in 1000 mL of water. 
    Adjust the pH with 18 N phosphoric acid or 10 N potassium hydroxide to 8.0 ± 0.1.
     
      BUFFER NO. 4, 0.1 M, pH 4.5— Dissolve 13.61 g of monobasic potassium 
    phosphate in 1000 mL of water. Adjust the pH with 18 N phosphoric acid or 10 N 
    potassium hydroxide to 4.5 ± 0.05.
     
      BUFFER NO. 6, 10 PERCENT, pH 6.0— Dissolve 20.0 g of dibasic potassium 
    phosphate and 80.0 g of monobasic potassium phosphate in 1000 mL of water. 
    Adjust the pH with 18 N phosphoric acid or 10 N potassium hydroxide to 6.0 ± 0.05.

      BUFFER NO. 10, 0.2 M, pH 10.5— Dissolve 35.0 g of dibasic potassium 
    phosphate in 1000 mL of water, and add 2 mL of 10 N potassium hydroxide. 
    Adjust the pH with 18 N phosphoric acid or 10 N potassium hydroxide to 10.5 ± 0.1.

      BUFFER NO. 16, 0.1 M, pH 7.0— Dissolve 13.6 g of dibasic potassium phosphate and 4.0 g of monobasic potassium phosphate in 1000 mL of water. 
    Adjust with 18 N phosphoric acid or 10 N potassium hydroxide to a pH of 7.0 ± 
    0.2.

      OTHER SOLUTIONS— Use the substances specified under Reagents, Indicators, 
    and Solutions. For water, use Purified Water. For saline, use Sodium Chloride 
    Injection. Dilute formaldehyde is Formaldehyde Solution diluted with water 1:3.

     

    上一篇:美國藥典(USP)簡介

    下一篇:微生物計數試驗——營養和添加劑

    相關文章:
    抗生素的威力有多大? 含聚酮鏈結構的抗生素的簡單介紹
    抗菌大環內酯類抗生素的簡單介紹 含聚酮鏈結構的抗生素
    抗生素檢測培養基II的試驗方法與現象 利用抗生素抗性基因篩選
    抗生素生物合成反應和途徑 其他抗生素的篩選
    抗病毒抗生素的篩選 常見的抗生素
    首頁 | 關于我們 | 網上商城 | 在線客服 | 聯系我們
    業務聯系電話
       400-0532-596 0532-66087773
       0532-66087762 0532-81935169
    郵箱:qdhbywg@vip.126.com
    地址:青島市城陽區錦匯路1號A2棟
    產品技術咨詢
      工作日(周一至周六8:00-18:00):
      18562658263 13176865511
      其它時段:13105190021
    投訴與建議:13105190021 13006536294
    (注:以上手機號均與微信同號)
    2022露脸国产偷人在视频_免费播放婬乱男女婬视频国产_JAPANESE丰满爆乳日本_被黑人强伦姧人妻完整版
  • <li id="iwaey"></li><li id="iwaey"><tt id="iwaey"></tt></li>
  • <td id="iwaey"><tt id="iwaey"></tt></td><li id="iwaey"><menu id="iwaey"></menu></li> <li id="iwaey"><menu id="iwaey"></menu></li><button id="iwaey"></button>
  • <button id="iwaey"></button>
  • <li id="iwaey"><menu id="iwaey"></menu></li>
  • <li id="iwaey"><menu id="iwaey"></menu></li>
  • <button id="iwaey"></button>
    <li id="iwaey"></li>